Skip to main content

M-6006-M50C – Ford Performance Parts

2018-20 MUSTANG 5.0L COYOTE 460HP MUSTANG LONG BLOCK

This long block assembly is the basis for the Ford Performance M-6007-M50C all-aluminum 2018-2020 5.0L Coyote crate engine.  This engine is a modern 5.0L 32-valve DOHC V-8 that uses advanced features like Direct and Port Fuel Injection, Twin Independent Variable Camshaft Timing (Ti-VCT), high-flow cylinder heads, and heightened compression ratio to deliver 460 horsepower @ 7,000 rpm and 420 ft.-lb.+ of torque @ 4,600 rpm (with premium fuel). The lightweight  plasma transferred wire arc spray aluminum cylinder block features cross-bolted main bearing caps and thick main bearing bulkheads for bottom-end strength, optimized oil drainback and windage control to improve high-rpm performance.

CALL FOR SHIPPING QUOTE

Payment Options

Bank Transfer
$6,500
M.S.R.P. $8,300
Credit Card
$6,750
M.S.R.P. $8,300
Contact RPM
  • 460 Horsepower @ 7,000 rpm
  • 420 ft.-lb.+ of Torque @ 4,600 rpm
  • 12.0:1 Compression ratio
  • Hypereutectic aluminum pistons
  • Sintered steel connecting rods as used on BOSS 302 Mustang
  • Forged steel crankshaft
  • Aluminum block which features plasma transferred wire arc spray weld liner coating
  • Longer, 12 mm head bolts for higher clamp load
  • 10 qt capacity oil pan
  • High-flow aluminum cylinder heads, dual overhead camshaft (DOHC), four valves per cylinder, variable intake and exhaust camshaft timing
  • Engine mount bosses and bell housing mount pattern common to 4.6L modular engines

 

 

 

 

This long block assembly DOES NOT include:
  • Intake manifold/throttle body
  • Fuel rails/fuel injectors
  • Water pump pulley
  • Alternator
  • Exhaust manifolds
  • Flywheel/flexplate
  • Engine wiring/PCM

 

 

 

PART TYPE:              Engine: Complete Engines

INSTRUCTION SHEET:         Not Available

WARRANTY AVAILABLE:    Available

PACKAGED DIMENSIONS:   36.5″ x 44.5″ x 36″

PACKAGED WEIGHT:             540 lbs

UPC CODE:                             756122012970

COUNTRY OF ORIGIN:         Canada

This part is designed and intended for competition use only. It should not be installed on a vehicle that is driven on public roads and highways. Installation of this part on a vehicle driven on public roads and highways is likely to violate U.S. and Canadian laws and regulations relating to motor vehicle emissions.

Not all Ford Performance Parts may be installed on vehicles that are driven on public roads. Click here for more information about compliance with emissions standards.